Pricelist Manager

In the pricelist control table you can configure prices.

To use a pricelist, it needs to be calculated for a number of type trees, this is done automatically the first time you add a new pricelist to your project. If you make changes to the pricelist, these will not take affect in treatment programs you generate until you have recalculated the pricelist.

Default degradation from timber to pulp

Allows you to define that a given percentage of the log is degraded from timber quality to pulp. The quality degradation could be due to log injuries, bends, rot, etc.

MiddlePulpPine etc.

Defines the percentage of the log part for pine that is degraded from timber to pulp.

MiddlePulpSpruce etc.

Defines the percentage of the log part for spruce that is degraded from timber to pulp.

Harvest residuals

Defines the price for harvest residuals.

HarvestResidualPrice

Defines the price, in SEK/ton, for harvest residuals.

Log diameters

Allows you to define minimum and maximum diameter for pulp log.

MinDiameterPulp, MaxDiameterPulp

Defines the minimum and maximum diameter for pulp logs. Logs outside these diameter values will not be used for pulp and will not get any pulp value.

Log lengths

Allows you to define min and max log lengths. These values are used in theoretical cross-cutting of trees.

MaxLengthPulp, MaxLengthTimber etc.

Defines the minimum and maximum log lengths for pulp and timber.

Pre-calculated pricelist

Allows you to control the granularity and size of the pre-calculated pricelist.

DiameterInterval

Defines the diameter interval, in mm, for which cross-cutting is done. For values between the given diameter interval, linear interpolation is done. Using a small interval means that the pricelist will be more accurate but it will take longer time to compute, and vice versa. (Simulation time is not affected by the interval.)

HeightInterval

Defines the height interval, in dm, for which cross-cutting is done. For values between the given height interval, linear interpolation is done. Using a small interval means that the pricelist will be more accurate but it will take longer time to compute, and vice versa. (Simulation time is not affected by the interval.)

MinDiameter

Defines the min diameter of the pre-calculated pricelist. Trees below the min diameter will get the value 0.

MaxDiameter

Defines the max diameter of the pre-calculated pricelist. Trees above this value will get their values from the max diameter.

Pulp

Allows you to define pulp prices.

BroadLeafPulpPrice etc.

Defines the pulp price in SEK/m3fub for different specices.

Timber

Allows you to define timber prices.

PineTimberPrice, SpruceTimberPrice

Pricelist for timber in different diameters and qualities for pine and spruce.